Does replacing a water heater need a permit in BC?
A gas or propane water heater needs a Technical Safety BC gas permit, or the city's in the few that issue their own; an electric one depends on the work.
Opens the lot's report at this answer. If an address isn't found, try the PID, the 9-digit parcel number on the land title or assessment notice.
What the answer means
Installing or replacing a gas water heater, like any gas appliance, needs a gas permit from Technical Safety BC, or from the city in the few that issue their own natural gas permits. An electric one's wiring is electrical work, and whether swapping it needs a permit isn't plain from the regulation, so ask. The plumbing side is the council's: Kamloops needs no permit to replace a tank in the same place.
- Gas and propane
- Technical Safety BC says a gas permit is needed for installing or replacing all gas appliances, a water heater among them, and for installing or replacing gas piping or vents (its homeowner gas permits page). An owner may do the work under a homeowner permit only in a fully detached home they live in, where no one is paid to help and no part is rented, and welding or plastic pipe needs its own training (Gas Safety Regulation ss. 1, 4, 24, as the electrical and gas permits page reads them); otherwise a licensed gas contractor takes the permit.
- Whose gas permit
- Technical Safety BC issues gas permits across BC except where a city issues its own: Burnaby, Maple Ridge, the City and District of North Vancouver, Vancouver, Kelowna and Richmond for natural gas at the meter's low pressure. Those cities' gas permits cover natural gas only, so propane work goes to Technical Safety BC (as the electrical and gas permits page reads Technical Safety BC's jurisdiction page; see propane tanks).
- Electric
- An electric water heater is wired on its own circuit, so its wiring is electrical work under the Electrical Safety Regulation. The regulation's list of work needing no permit names like-for-like receptacles, switches, thermostats and breakers, not a water heater (s. 18, as the electrical and gas permits page reads it), so whether swapping one tank for another needs a permit is unclear: ask Technical Safety BC, or the city in the places that issue their own electrical permits.
- The plumbing side
- Plumbing permits are the local government's, under its building bylaw (see plumbing permits). The City of Kamloops needs no building or plumbing permit to replace a hot water tank in the same location, and notes that the Plumbing Code asks for an expansion tank, fitted to its maker's instructions, where the water system has no other way to take up expansion, which some insurers also want (its Bulletin No. 23-01, revised April 2025). Moving the tank, changing to a different hot water system (such as a tank to a tankless one), or adding or moving water lines is plumbing work Kamloops keeps under a permit (the same bulletin).
- Strapping it down
- PreparedBC's guide says to strap water heaters snugly to the wall and, if needed, have a licensed gas contractor fit a flexible gas line (as the seismic retrofit page reads it). A full tank that tips in an earthquake can break its gas or water line (our reading; see earthquake).
- Owned or rented
- Many water heaters are rented or financed, not owned. A deal that secures payment for goods fixed to the house can be filed as a notice on the land title, and the company can remove the goods on notice if it isn't paid (Personal Property Security Act ss. 36, 49, as the rented and financed equipment page reads them). A rented tank isn't the seller's to sell, so the contract should say whether it stays, and who takes over the rental (our reading).
- Heat pump water heaters
- A heat pump water heater is wired like an electric one and may need room around it and a drain; rebates, where offered, are listed by CleanBC Better Homes. Check its current list before you count on one (our reading; see heat pumps).
- What it means for a buyer
- Ask how old the water heater is, who installed it, and whether it is owned or rented. A gas one put in by the owner or a contractor should have a Technical Safety BC permit, which its Permit Lookup Tool shows by address, open or closed (as the electrical and gas permits page reads it). A missing permit is unpermitted work the next owner inherits (see unpermitted work).
Our summary of Technical Safety BC's homeowner gas permits page and the City of Kamloops' Bulletin No. 23-01 (revised April 2025), read 2026-10-28, and of the Gas and Electrical Safety Regulations, PreparedBC's guide and the Personal Property Security Act as the electrical and gas permits, seismic retrofit and rented and financed equipment pages read them. Other councils' plumbing bylaws differ and we haven't read them: ask the council.
Source: Homeowner gas permits, Technical Safety BC (summarised in our words, read 2026-10-28); Bulletin No. 23-01, When Building Permits Are Required, City of Kamloops (revised April 2025; summarised in our words, read 2026-10-28); Gas Safety Regulation, B.C. Reg. 103/2004, ss. 1, 4, 23, 24 (summarised in our words, read 2026-10-19); Earthquake and Tsunami Preparedness Guide, PreparedBC (summarised in our words, read 2026-10-23); Find rebates, CleanBC Better Homes (linked, read 2026-10-28).
Before you buy: who to ask
- The seller or their agent
- How old is the water heater, who installed it, and under which permit? Is it owned, rented or financed, and does it stay with the house?
- The local government
- Does your bylaw need a plumbing permit to replace or move the water heater? Do you issue your own gas or electrical permits?
Look up the lot above: its earthquake section gives the shaking a tank has to be strapped against.
See also plumbing permits, electrical and gas permits, propane tanks, rented and financed equipment, earthquake strengthening, replacing a furnace and heat pumps.