PlaceDossier / Zoning / Town of Princeton

RM2: Multi-Family Residential (Low Density)

A zone in Town of Princeton Zoning Bylaw No. 880, 2013 (Town of Princeton). Our summary of Section 15 of the bylaw as consolidated to 2022-12-05.

What the zone allows

Homes allowed
Apartments, townhouses, duplexes and houses up to 50 two-bedroom homes a hectare (smaller homes count less, larger more, s. 15.6) and 0.45 floor area ratio; congregate care; a suite, or a carriage house beside a house
Main uses
Apartment buildings, townhouses, duplexes, single detached houses, congregate care housing; carriage house (with a house), minor home occupation (major only in a house), secondary suite
Smallest lot for a subdivision
669 m² fully serviced, 836 m² on community water alone; 18 m of frontage with a lane, 21.3 m without
Lot coverage
35% for one-storey buildings, 25% for taller ones
Height limit
10 m or 2 storeys; accessory buildings 7.5 m
Setbacks
Front 6 m, rear 6 m, interior sides 2.4 m, exterior side 4 m; accessory buildings front 6 m, rear 3 m, sides 2.4 m, exterior side 4 m

The zone is for low density multi-family housing up to two storeys (s. 15). Homes are at least 40 m² (bachelor) or 55 m² for one bedroom plus 15 m² for each more.

Open space per home (s. 15.3): 21 m² for a bachelor, 32 m² for one bedroom, 62 m² for two, 101 m² for three or more; a quarter of it at ground level outside.

Secondary suite (ss. 6.30 to 6.32): inside a house or half a duplex, one per home, 32 m² to 125 m² and at most 40% of the home; not on a lot with a carriage house; 15 m² of outdoor space each for the home and the suite, and one more parking space with its own way to the street.

Carriage house (s. 6.7): one per lot, not with a secondary suite; up to 100 m² or 15% of the lot, whichever is less; no closer to the front than the house, 3 m from it and 3 m from the rear line (1.5 m on a lane); the accessory buildings' height and side setbacks; on Town water and sewer where they reach; 15 m² of outdoor space each and one more parking space.

Major home occupation (s. 6.25): one per lot, inside the house, carriage house or suite, up to 75 m² or 25% of the home; one employee from outside, up to five clients at a time, parking for all of them; no vehicle repair, trades or industrial uses, or selling goods made elsewhere except by mail or online.

Minor home occupation (s. 6.26): inside the home, carriage house or suite, up to 50 m² or 20% of the home; residents only, one client visit a day, no change to the home's look; no vehicle repair, trades or industrial uses.

The bylaw doesn't list short-term rental of a whole home as a use in this zone, and the zone allows only the uses it lists: ask the Town of Princeton before renting a home short term.

Garages, carports, sheds and greenhouses together cover at most 75 m² on a residential lot, stand behind the house's front, and go up only with or after it; accessory buildings and a carriage house together are no larger than the house (ss. 6.3, 6.4).

Flood protection (s. 6.12): no building within 7.6 m of the landward toe of the Tulameen and Similkameen River dyke or 15 m of another watercourse's natural boundary; living space at least 0.6 m above the 200-year flood level, or 3 m above the watercourse's natural boundary where that level isn't known.

Fences up to 1.2 m in the front setback and 1.8 m in side and rear setbacks (ss. 6.10, 6.11).

Site-specific exceptions listed in the bylaw by legal description can add or change uses for one property, and development permit areas, the ALR and building rules apply on top. Confirm with the Town of Princeton's planning department before you buy or build.

Source: Section 15 of Town of Princeton Zoning Bylaw No. 880, 2013 (summarised in our words, checked 2026-10-05); zone map: Open Government Licence – Regional District Okanagan Similkameen.

Town of Princeton Zoning Bylaw No. 880, 2013 applies in Princeton.

Other residential zones in this bylaw

RC Country Residential, RS1 Single Family Residential, RS2 Single Family Residential (Small Parcel), RD Two Family Residential, RM3 Multi-Family Residential (Medium Density).